Large Diameter Turning Services Up to 90″

VTL Machining Services & Horizontal Turning Centers

Greno Industries provides heavy-duty large diameter CNC turning services for oversized, mission-critical components across power generation, aerospace, defense, and turbomachinery.

Operating from our Scotia, New York contract manufacturing plant, our facility utilizes heavy-payload Vertical Turning Lathes (VTLs) and rigid horizontal turning centers with integrated live tooling to hold tolerances down to ±0.0005″ on diameters up to 90 inches.

Whether machining massive forgings, centrifugal castings, or long-bed industrial shafts in work-hardening superalloys, Greno controls tool deflection, thermal growth, and chatter to deliver AS9100-certified components ready for assembly.

.

Technical Capabilities & Machine Envelope Specifications

Our large-format turning cells are engineered with high-torque gearboxes, hardened box ways, and multi-axis live tooling to support heavy metal removal, deep-bore profiling, and single-setup multi-operation machining.

Technical ParameterSpecification / Facility Capacity
Maximum Turning Diameter (VTL Swing)Up to 90" (2,286 mm) outer diameter (OD)
Maximum Horizontal Turning SwingUp to 36"+ over bed for extended length shafts and cylinders
Live Tooling CapabilitiesDriven C-axis milling, cross-drilling, and rigid tapping
Standard Machining TolerancesDown to ±0.0005" (0.0127 mm) or custom GD&T callouts
Surface Finish ControlAs-turned 32–63 Ra (micro-finishing/polishing down to 16 Ra or better)
Material Form FactorsOpen/closed-die forgings, sand castings, heavy-wall pipe, solid billets
Overhead Crane CapacityHeavy-tonnage overhead crane support for safe loading of oversized forgings
Quality CertificationsAS9100 Rev D, ISO 9001:2015, ITAR Registered (CAGE: 62654)
Accepted CAD File FormatsSTEP (.stp), IGES (.igs), Parasolid (.x_t), DXF, DWG, SolidWorks (.sldprt)

Heavy Turning Machine Fleet & Equipment

We operate a dedicated fleet of rigid horizontal and vertical turning machines designed to minimize part deflection under high cutting pressures:

Vertical Turning Lathes (VTL)

  • Toshiba 80-Inch VTL (Live Tooling): Built for wide swings, heavy rings, turbine casings, and flanged components where perpendicularity, concentricity, and face-flatness are mandatory.

  • New Century CNC 76 (Live Tooling): Features integrated multi-axis live spindle capabilities to perform face-milling, bolt-hole circle drilling, and keyway milling without transferring the workpiece to a separate milling center.

  • King CNC 72 Heavy-Duty VTL: High-rigidity, high-torque table drive engineered for aggressive roughing cuts on large, un-machined raw castings and heavy structural weldments.

horizontal turning

Horizontal Turning Centers

  • Okuma LU7000EX (Dual-Turret with Live Tooling): High-throughput, multi-axis simultaneous turning for long-bed industrial shafts, rotor bodies, and thick-wall pressure cylinders.

  • Okuma LOC650 4-Axis Simulturn: Dual-turret architecture engineered for balanced cutting and vibration reduction on extended-length workpieces requiring complex OD/ID grooving.

  • Okuma L470BB Big-Bore Precision Lathe: Extreme spindle power and high-rigidity bed length for precision turning of long alloy steel and superalloy components.

vertical turning lathe capacity

Materials Machined at Large Diameters

Turning massive parts in high-strength alloys requires precise coolant delivery, vibration dampening, and advanced chipbreaker geometries to prevent work-hardening and tool failure:

  • Nickel & High-Temp Superalloys: Inconel (625, 718), Hastelloy C-276, Monel (400, K500), Waspaloy, Stellite®.

  • Stainless Steels: 304/304L, 316/316L, 410, 420, Martensitic & Austenitic grades, 17-4 PH, 15-5 PH, Nitronic® 50/60, and Duplex 2205.

  • Structural Steels & Heavy Forgings: 4140, 4340, 8620, 1018, 1045, Tool Steels (D2, A2, H13).

  • Titanium Alloys: Grade 2, Grade 5 (Ti-6Al-4V).

  • Non-Ferrous & Bearing Alloys: Aluminum (6061, 7075, 2024), Aluminum Bronze, Phosphor Bronze, Bearing Brass, Copper-Nickel.

Engineering Comparison: Vertical Turning Lathes (VTL) vs. Horizontal Lathes

Machining AttributeHorizontal Turning LathesVertical Turning Lathes (VTL)
Primary Workpiece ProfileLong shafts, extended rollers, heavy-wall tubesWide rings, large discs, casings, flanged valves
Raw Material GeometryBar stock, long cylindrical forgings, extrusionsCastings, forged rings, plate discs, massive weldments
Gravity Impact on FixturingPart weight induces spindle overhang and saggingGravity rests the workpiece flat on the horizontal table
Clamping on Thin-Walled PartsHigh radial chuck pressure can cause out-of-round distortionLower downward clamping pressure prevents thin-wall deflection
Core Geometric StrengthsAxial straightness, runout, and length-wise parallelismFace flatness, true perpendicularity, and radial roundness
Chip Evacuation DynamicsNatural gravity fall away from cutting interfaceRequires high-pressure through-tool coolant flushing

Precision Components Produced

  • Power Generation & Turbomachinery: Gas turbine casing rings, steam seal rings, rotor shafts, diaphragm rings, stator covers, and runner hubs.

  • Oil, Gas & Subsea: High-pressure blowout preventer (BOP) housings, large valve bodies, flange adapters, subsea riser connectors, and mud pump liners.

  • Pumps, Compressors & Fluid Flow: Split-case pump rings, large impeller blanks, multi-stage compressor casings, and bearing sleeves.

  • Industrial Automation & Heavy Machinery: Large-bore hydraulic cylinders, winch drums, crane wheels, heavy drive axles, and turntable bearing rings.

Quality Assurance, Defense Standards & Inspection

Every large-diameter turned component is inspected using calibrated metrology to ensure compliance with AS9100 Rev D, ISO 9001:2015, and ITAR defense guidelines:

  • In-Process & Final Dimensional Inspection: Multi-axis portable coordinate measuring machines (CMM arms), laser trackers, bore profiling gaging, and precision outside micrometers calibrated to NIST standards.

  • Surface Integrity Verification: Calibrated profilometers for micro-inch roughness verification (Ra, Rz).

  • Traceable Documentation Packages: First Article Inspection Reports (AS9102 FAIR), physical and chemical Material Test Reports (MTRs), and Certificates of Conformance (CoC).

  • Defense Credentials: ITAR Registered, CAGE Code: 62654, NAICS Code: 332710.

Large Part Turning Frequently Asked Questions

What diameter and weight capacities can Greno handle for turning?

Greno Industries accommodates large-diameter components up to 90 inches (2,286 mm) in diameter on our heavy-duty Vertical Turning Lathes (VTLs). For long, horizontal shafts and cylinders, our heavy-bed horizontal turning centers support extended lengths and substantial weight capacities supported by overhead plant cranes.

A VTL places the spindle vertically and the rotary chuck table horizontally. This configuration uses gravity to seat heavy castings or forgings flat on the table, eliminating spindle droop and workpiece sagging. It also significantly reduces the chuck clamping pressure required to secure the part, preventing out-of-round distortion on thin-walled rings and large flanges.

Yes. Several of our large-format machines—including our Toshiba 80-inch VTL, New Century CNC 76, and Okuma LU7000EX—feature multi-axis driven live tooling. We can turn, face-mill, cross-drill, slot, and tap on large diameters in a single fixturing setup, eliminating cumulative tolerance stack-up and cutting manufacturing lead times.

We control thermal expansion and vibration using rigid, heavy-cast machine beds, dedicated vibration-dampening boring bars, tuned cutting inserts, and flood coolant systems. For critical-tolerance components, parts stabilize to room temperature before final finishing cuts and CMM verification.

Request a Large Part CNC Turning Quote

Submit your CAD models and 2D engineering prints for engineering review and quotation:

  • Manufacturing Facility: Greno Industries, Inc. — 2820 Amsterdam Road, Scotia, NY 12302-6323

  • CAGE Code: 62654 | NAICS Code: 332710

  • Direct Telephone: (518) 393-4195

  • Email Inquiries: RFQ@grenoindustries.com

  • Upload Files: Submit RFQ Online (STEP, STP, IGES, Parasolid, DXF, and PDF drawings accepted)

greno industries | thank you | greno industries blog | contact greno | faq

Get Started With Greno Industries