Greno Industries delivers high-precision medical device machining services for medical device OEMs, surgical innovators, and diagnostic equipment manufacturers. Utilizing multi-axis Swiss CNC turning, 5-axis micro-milling, and wire EDM, we manufacture intricate components with tolerances as tight as ±0.0001 inches (±0.0025 mm) and ultra-smooth surface finishes down to 16 Ra or better.
From minimally invasive surgical instruments and orthopedic implant trials to robotic surgery articulation assemblies, Greno pairs advanced quality management systems (ISO 9001 & AS9100) with strict material traceability to ensure every component performs reliably in life-critical medical environments.
Medical components present severe design constraints: microscopic dimensions, complex organic contours, thin wall thicknesses, and zero tolerance for tool marks or micro-burrs.
Multi-Axis Swiss CNC Turning: High-speed, high-precision sliding-headstock turning designed for long, slender, miniature parts such as bone screws, guide pins, cannula components, and trocar shafts without part deflection.
5-Axis Simultaneous Micro-Milling: Continuous multi-axis contouring of complex geometries for surgical handpieces, endoscopic articulation joints, and prosthetic housings in single-setup cycles.
Precision Wire & Sinker EDM: Contact-free electrical discharge machining ideal for micro-slotting, keyways, delicate flexures, and burr-free cuts in ultra-hard medical alloys.
Micro-Deburring & Clean Finishing: Controlled microscopic edge radiusing, ultrasonic solvent cleaning, passivation, and automated glass bead blasting to eliminate microscopic particulate contamination.
Contamination control and certified material purity are vital in medical manufacturing. Greno machines fully traceable, certified biocompatible materials:
| Material Classification | Common Medical Alloys / Polymers | Typical Medical Applications |
|---|---|---|
| Implantable Titanium | Ti-6Al-4V ELI (Grade 23), CP Titanium (Grades 2 & 4) | Orthopedic bone plates, dental fixtures, spinal cages, pacing housings |
| Medical Stainless Steels | 316L / 316LVM, 17-4 PH, 420, 440C | Surgical scalpels, retractors, forceps, orthopedic drill bits, trocar needles |
| Cobalt-Chromium Alloys | Co-Cr-Mo (ASTM F75, ASTM F1537) | Joint replacement femoral stems, dental frameworks, heart valve rings |
| High-Performance Polymers | PEEK (Medical & Implant Grade), Delrin (Acetal), Radel (PPSU) | Sterilization trays, endoscopic handles, trial implants, fluid manifolds |
| Specialty Medical Alloys | Nitinol (Shape Memory), MP35N | Vascular clip systems, catheter components, guidewire tips |
Greno manufactures custom components across a broad spectrum of medical specialties:
Surgical Instrumentation: Ergonomic driver handles, scissors, clamping jaws, needle holders, cannula hubs, and laparoscopic grasping mechanisms.
Robotic & Minimally Invasive Surgery (MIS): Cable-driven wrist articulation joints, miniature pulleys, end-effector housings, and actuator shafts.
Orthopedic & Spinal Systems: Extramedullary guides, reamer shafts, pedicle screw blanks, rod benders, and trial reduction components.
Diagnostic & Analytical Equipment: Fluidic sampling blocks, HPLC pump valves, centrifuge shafts, spectrometer mounts, and optical sensor housings.
Cardiovascular & Catheter Systems: Deployment delivery tips, crimp rings, valve delivery fixtures, and pressure transducer housings.
Greno enforces strict quality controls across every stage of the manufacturing process to support customer FDA submissions and quality audit standards:
Rigorous Quality System Alignment: Managed under ISO 9001 and AS9100 quality frameworks aligned with medical device manufacturing requirements.
100% Material Purity & MTR Documentation: Full heat and lot traceability with verifiable Mill Test Reports (MTR) confirming biocompatibility and chemical composition.
Optical & Contact CMM Metrology: Automated coordinate measuring machines and high-magnification vision systems for complete geometric dimensioning and tolerancing (GD&T) verification.
Lot Traceability & Serialization: Laser marking and serial tracking for cradle-to-grave component identification.
Passivation & Secondary Processing: Certified passivation per ASTM A967 to ensure maximum corrosion resistance and passive chromium-oxide layer development.
Medical device machining demands stricter raw-material purity standards (such as vacuum-arc remelted 316LVM or implant-grade titanium), microscopic burr-free edge standards, specialized ultrasonic cleaning, and rigorous validation documentation (IQ/OQ/PQ) to comply with FDA and international healthcare regulations.
es. Our engineering team works directly with biomedical engineers during early-stage development to optimize tool access, suggest standard tooling geometries, advise on material selection, and reduce cycle times before locking in clinical production drawings.
We routinely achieve surface finishes between 16 Ra and 8 Ra on critical sliding surfaces through precision micro-milling, burnishing, electropolishing, and multi-stage vibratory finishing.
We use dedicated cutting tools, isolated coolant delivery setups, and rigorous post-machining ultrasonic cleaning processes to prevent cross-contamination between carbon steels, titanium, and medical polymers.
Submit your CAD models and 2D prints for engineering review and rapid pricing.
Email: RFQ@grenoindustries.com
Direct Phone: (518) 393-4195
Location: 2820 Amsterdan Rd, Scotia, NY 12302
Upload Files: Request a Quote Online (STEP, IGES, DXF, and PDF drawings)