Greno Industries delivers heavy-duty, high-precision oil and gas parts engineered to perform under extreme pressure, severe mechanical abrasion, and highly corrosive operating environments. Backed by ISO 9001 and AS9100 certified manufacturing operations, we produce mission-critical components for upstream exploration, midstream transport, and downstream processing facilities worldwide.
From deep-sea subsea manifolds rated for 15,000+ PSI to Measurement-While-Drilling (MWD) electronic chassis operating in high-temperature downhole wells, Greno combines multi-axis CNC turning, deep-hole boring, and 5-axis milling to machine custom oilfield components with continuous tolerances down to ±0.0002 inches (±0.005 mm).
Drilling and extraction operations tolerate zero component failure. Greno manufactures rugged oil and gas parts across key industry segments:
Downhole Drilling & MWD/LWD Tools: Non-magnetic drill collars, sensor pressure housings, mud motor rotor/stator shafts, reamer bodies, and jarring tool mandrels.
Subsea & Offshore Production: Subsea tree valves, flowline connector hubs, blowout preventer (BOP) hydraulic components, riser joints, and remotely operated vehicle (ROV) intervention tooling.
Surface Wellheads & Flow Control: High-pressure gate valve bodies, chokes, manifold blocks, flange adapters, and casing heads rated for high-pressure, high-temperature (HPHT) applications.
Refining & Petrochemical Processing: Pump impellers, heavy compressor shaft sleeves, heat exchanger tube sheets, and hydrocracker valve plugs.
Oilfield hardware frequently demands long turning envelopes, deep ID boring, and rigid milling setups to cut pre-hardened, high-tensile forgings.
Heavy-Duty CNC Turning: Large-capacity CNC lathes and horizontal turning centers capable of turning drive shafts, mandrels, and subsea housings up to 60+ inches long with precision concentricity.
5-Axis Simultaneous Milling: Complex profiling of fluid ends, cross-drilled manifold blocks, and asymmetrical valve housings in unified setups to eliminate tolerance stacking.
Deep Hole Drilling & Gun Drilling: Precision internal boring for long fluid conduits and electronic wireline pathways across lengthy downhole tools.
Precision Threading: Machining specialized API rotary-shouldered threads, premium proprietary threads, and heavy Acme casing threads designed for high torque and leak-proof seal integrity.
Sour gas, saline fluids, and sand slurry cause rapid erosion and stress corrosion cracking. Greno machines certified raw stock and forgings compliant with NACE MR0175 / ISO 15156 standards:
| Material Family | Typical Alloys Machined | Key Operational Advantages | Primary Oil & Gas Parts |
|---|---|---|---|
| Nickel Superalloys | Inconel 718, Inconel 625, Hastelloy C-276 | Immunity to pitting, crevice corrosion, and H2S embrittlement | Subsea valve trims, downhole sensor housings, BOP seal carriers |
| Duplex & Super Duplex | 2205 Duplex, 2507 Super Duplex | High yield strength and chloride stress corrosion cracking resistance | Subsea pipe hubs, manifold blocks, pump impellers |
| Alloy & Quenched/Tempered Steels | 4140, 4340, 4130 (75K/80K yield) | High fatigue strength and shock absorption for heavy mechanical loads | Drill collars, mud motor mandrels, lift plugs |
| Precipitation Hardening Stainless | 17-4 PH (H1150M), 15-5 PH | Excellent mechanical strength combined with moderate corrosion resistance | Actuator shafts, hydraulic pistons, flow control stems |
| Non-Magnetic & Copper Alloys | ToughMet (CuNiSn), Monel K-500, Beryllium Copper | Anti-galling, non-sparking, low magnetic permeability for MWD tools | Drill string stabilizer sleeves, logging collars, wear bushings |
Reliability in the field depends on complete manufacturing validation and metallurgical compliance before components ship to the rig floor:
AS9100 Rev D & ISO 9001:2015 Systems: Audited, repeatable production procedures ensuring process stability across single prototypes and recurring blanket orders.
100% Traceable Mill Test Reports (MTR): Every component is tied to original heat numbers, heat treatment charts, and mechanical property testing reports.
Automated Coordinate Measuring Machines (CMM): Zeiss CMMs located in climate-controlled quality labs verify critical dimensional tolerances and GD&T features.
Non-Destructive Examination (NDE/NDT): Through accredited partner networks, we provide Magnetic Particle Inspection (MPI), Liquid Penetrant Testing (LPT), and Ultrasonic Testing (UT) to verify defect-free structural integrity.
Oil and gas parts must endure extreme mechanical torque, abrasive mud slurries, corrosive sour gas (H2S), and hydrostatic pressures exceeding 15,000 PSI. Manufacturing these components requires strict compliance with NACE MR0175, heavy-duty chip evacuation techniques, defect-free surface micro-finishes, and full metallurgical traceability.
For components exposed to sour service, Greno strictly follows NACE MR0175 / ISO 15156 guidelines regarding material chemistry, maximum hardness limits (e.g., Rockwell C limits), and post-machining stress relief or heat treatment to prevent sulfide stress cracking.
Yes. Our multi-axis turning centers feature advanced threading software and high-rigidity tooling capable of cutting standard API rotary connections, stub Acme threads, and custom proprietary thread profiles with tight pitch diameter tolerances.
Send your 2D engineering prints, 3D CAD models (STEP, Parasolid, or IGES), material specifications, hardness requirements, and delivery timeline through our secure RFQ portal. Our engineering team will review the technical package and provide a comprehensive proposal.
Send your CAD models and 2D engineering prints for technical review and pricing:
Facility Location: Greno Industries, Inc. — 2820 Amsterdam Road, Scotia, NY 12302-6323
CAGE Code: 62654 | NAICS Code: 332710
Direct Telephone: (518) 393-4195
Technical & RFQ Inquiries: RFQ@grenoindustries.com
Online RFQ: Submit CAD Files Online (STEP, STP, IGES, Parasolid, DXF, and PDF drawings)