Greno Industries delivers advanced titanium machining services engineered for the world’s most demanding flight-critical, defense, and high-performance industrial applications. Backed by AS9100 and ISO 9001 certified quality management systems, our facility combines rigid high-torque CNC milling centers, dual-spindle turning machines, and advanced through-spindle high-pressure coolant (HPC) delivery to machine exotic titanium alloys with repeatable tolerances as tight as ±0.0001 inches (±0.0025 mm).
Titanium’s exceptional strength-to-weight ratio and corrosion resistance make it an indispensable material. However, its low thermal conductivity, elastic memory, and reactivity demand specialized machining science. Greno pairs decades of metallurgical experience with optimized cutting dynamics to prevent work hardening, manage thermal dissipation, and deliver flawless surface finishes.
Cutting titanium requires a fundamentally different operational approach than traditional steel or aluminum manufacturing. Greno has solved the primary metallurgical bottlenecks associated with titanium manufacturing:
Thermal Management & Tool Life: Because titanium transfers heat into the tool rather than the chip, Greno employs 1,000+ PSI through-tool high-pressure coolant systems paired with customized AlTiN/TiAlN PVD-coated carbide cutters to keep interface temperatures below critical breakdown points.
Vibration Dampening & Rigidity: Titanium’s lower modulus of elasticity causes deflection and chatter on thin walls. Our machinists use ultra-rigid hydraulic toolholders, customized workholding jigs, and dynamic trochoidal milling toolpaths that maintain constant tool engagement.
Galling & Built-Up Edge Prevention: Precise feed-per-tooth planning and continuous chip shearing eliminate smearing and material adhesion, ensuring pristine micro-inch surface finishes without secondary polishing operations.
Greno sources DFARS-compliant, fully certified bar stock, forgings, and plate to machine standard and specialized titanium grades:
| Titanium Grade | Material Composition / Class | Common Characteristics | Typical Applications |
|---|---|---|---|
| Ti-6Al-4V (Grade 5) | Alpha-Beta Alloy (6% Al, 4% V) | High tensile strength, excellent fatigue resistance, heat-treatable | Aircraft structural frames, turbine blades, rocket motor cases |
| Ti-6Al-4V ELI (Grade 23) | Extra Low Interstitial Alpha-Beta | Superior fracture toughness, bio-compatible, high ductility | Medical implants, surgical instruments, deep-sea exploration housings |
| CP Titanium (Grades 1–4) | Commercially Pure (Unalloyed) | Maximum corrosion resistance, high cold formability | Chemical processing reactors, marine desalinization valves, heat exchangers |
| Grade 7 & 11 | CP Titanium with 0.12–0.25% Palladium | Extreme resistance to crevice corrosion and reducing acid environments | Subsea oil & gas manifolds, chemical production piping |
| Near-Beta Alloys (Ti 5553, 10-2-3) | High-Strength Structural Alloys | Extreme yield strength, deep hardenability | Heavy landing gear components, helicopter rotor masts |
Aerospace & Defense: Engine stator components, turbine shrouds, wing spar attachment fittings, hydraulic actuator sleeves, missile guidance fins.
Marine & Subsea Energy: Submersible pressure vessels, sea-chest fasteners, downhole sensor housings, subsea wellhead valving.
Power Generation: High-temperature steam turbine blades, compressor discs, nuclear instrumentation shrouds.
Medical & Biomedical: Orthopedic joint replacement fixtures, surgical tool shafts, external fixation clamps.
Every titanium component machined at Greno is subjected to full verification to ensure structural integrity and compliance with design engineering specifications:
AS9100 Rev D & ISO 9001:2015: Fully audited quality management system.
ITAR Registered: Secure handling of export-controlled technical data for defense and armaments.
AS9102 First Article Inspection (FAI): 100% ballooned inspection documentation, material certifications, and special process certifications.
Dedicated Climate-Controlled Metrology: In-house coordinate measuring machines (CMM) calibrated for micron-level dimensional verification.
Non-Destructive Testing (NDT): Through certified partners, we manage liquid penetrant testing (PT), ultrasonic testing (UT), and radiographic inspection.
Titanium offers nearly the strength of high-strength alloy steels at roughly 45% less weight, and it outperforms aluminum at elevated operating temperatures. Furthermore, its natural passive oxide layer provides virtually complete immunity to saltwater and industrial chemical corrosion.
The primary cost drivers include raw material prices, machine cycle times (titanium requires slower surface speeds and lower RPMs to control heat), and accelerated cutting tool wear. Greno mitigates these costs through optimized CAM toolpaths, bulk material procurement, and high-efficiency cutting parameters.
Yes. We regularly machine complex net-shape and near-net-shape titanium forgings and castings, utilizing specialized custom workholding and probing cycles to align raw casting datums.
Upload your 3D CAD files (STEP, IGES, or Parasolid), 2D technical drawings with GD&T callouts, material specification (e.g., AMS 4928, ASTM B348), and lot quantities through our secure RFQ portal. Our technical team typically provides an engineering review within 24 to 48 hours.
Submit your CAD models and 2D prints for engineering review and rapid pricing.
Email: RFQ@grenoindustries.com
Direct Phone: (518) 393-4195
Location: 2820 Amsterdan Rd, Scotia, NY 12302
Upload Files: Request a Quote Online (STEP, IGES, DXF, and PDF drawings)